The Viewfinder 5 degree provides both direct flash and ambient 5 degree reflected-light, spot readings when used with the LiteMaster Pro L-478D and L-478DR meters (available separately).
Narrow spot readings enable reading specific areas of a subject.
Useful for measuring exposure for theater, sports and landscapes photography.
Required for using Sekonic DTS system to calibrate meter to the dynamic range of digital still and video cameras.
Sekonic RT-32CTL Radio Transmitter Module provides compatibility with the PocketWizard® ControlTL® channels in addition to the original Standard triggering channels.
Compatible with both FCC (USA) and CE (Europe) frequencies, the new RT-32CTL Radio Transmitter module can be used in Sekonic wireless-ready meters and supports all ControlTL® channels available for either market system as well as ControlTL Zones (A, B, C). Both ControlTL and Standard signals are broadcast with each trigger so ControlTL and Standard radios can be used together.
This enables photographers to precisely set up dimensional lighting scenarios quickly and easily in the Studio or on location.
The RT-32CTL transmitter module is universal and can be used with either USA/North America market products or European products. Compatible with ControlTL products as well as Standard channel products of PocketWizard®.
Use for triggering PocketWizard ControlTL Products such as MiniTT1, FlexTT5, ST4, MC2. Also triggers Standard PocketWizard products such as PLUS series and MultiMAX.
PocketWizard ControlTL® radios will require a firmware update to work properly with Sekonic light meters with RT-32CTL in ControlTL mode.
The following is a list of firmware updates needed for ControlTL compatibility with the RT-32CTL:
§ PowerST4 – firmware 5.100 or later*
§ PowerMC2 – firmware 2.200 or later*
§ FlexTT5® for Canon – firmware 6.100 or later*
§ FlexTT5® for Nikon – firmware 3.100 or later*
* Available immediately for download at http://www.pocketwizard.com/support/downloads/
Please check www.PocketWizard.com for more information.
A 25 patch test target that gathers more information about the camera's exposure characteristics than the previous test target. It consists of two sides: An 18% Gray Card used to custom gray (white) balance digital cameras before profiling; A Profile Target consisting of a central 18% gray patch that is surrounded by 24 patches arranged in 1/6th stop values that are successively brighter and darker.
The Exposure Profile Target II offers faster, more accurate testing as it requires only three shots to gather a wide range of exposure data from the camera's imaging system. The first shot is made at the normal, metered exposure determined by a Sekonic L-758DR. The second shot is made at -3EV below the metered exposure and the third shot at +3EV above the metered exposure. Please refer to the illustrations on the next page.
To profile your camera and lens combinations, the Exposure Profile Target II is fully compatible with FREE Data Transfer Software and the L-758D, L-758DR, L-758Cine, L-478D, and L-478DR light meters. The result is total exposure accuracy.
The L-478-series takes the mystery out of mixing ambient light and flash. Touch to select the measurement mode that fits your shooting style. Measure the brightness of a single light or the exposure for all. Read flash with a cord or cordlessly. Touch to compare, analyze and display for the very best results.
Keeping pace with wireless advancements, the L-478DR comes complete with its exclusive PocketWizard® ControlTL® technology (L-478DR only). Combining light measurement and flash power control into a hand held light meter has resulted in a sophisticated and simple tool for photographers who choose to craft light, and not just record it.
The pocket-sized Sekonic L-308S Flashmate is the smallest and lightest digital light meter in the Sekonic line-up. It is designed to read ambient or flash exposures in either reflected or incident modes, and it displays accurate exposure readings in full, half, or third-stop increments to mirror the exposure settings of today’s DSLR and film cameras.
The L-308S delivers accurate exposure readings in full-, half-, or third-stop increments to mirror the exposure displays of most popular cameras. When set to full-stop mode, exposures are displayed in tenth-stop increments with a repeat accuracy of +/- 0.1 EV.
The LCD screen is designed to emulate the look and feel of its bigger brother, the Sekonic L-358 flash meter. Exposure data and related information are displayed using large type and easy-to-read icons, perfectly legible in even low-level lighting conditions.
Supplier Out of Stock
What moves the L-758DR DigitalMaster to the head of the class? It’s the only meter that can be calibrated to read light the way your particular camera system reads light.
Every camera system is unique. Optical, mechanical and imaging components all act on each other to produce slight differences in exposure and the dynamic range of the camera system. Sekonic helps you discover the differences in your camera system and use this information to control light, make better exposures and take better pictures than ever before.
By running an easy calibration test using Sekonic’s L-758DR, one of Sekonic’s Exposure Profile Targets (purchased separately) and the available DTS V3.0 Software (Mac & Windows), you can accurately profile the characteristics of your camera’s imaging system to determine its true native ISO, dynamic range and clipping points.
After processing the test data and determining exposure parameters, the resulting data is uploaded from your computer via the included USB cable to the meter, where it is stored as camera profiles. Profiling data from up to three cameras can be stored in your meter for instant recall.
Knowing the dynamic range of your digital camera can help you get the best exposures possible. Using the Sekonic L-758DR Light Meter and Sekonic Exposure Target plus Free Data Transfer Software, you can profile your digital camera and lens combinations. The result is total exposure accuracy.